Women's Mint BOA® Snowboard Boots

Dual-Zone BOA® Fit System with Coiler™ technology features two distinct lace zones that can be independently adjusted with the twist of a dial for a custom fit in both the upper and lower portions of the boot.

A Burton-exclusive upgrade to BOA®, Lockdown Lacing increases heel hold by integrating three distinct lacing zones with a single crank-able dial. Tightening all zones (upper, lower and heel/Achilles) both rapidly and simultaneously results in a secure and consistent fit throughout the boot with greater hold in the heel pocket for an overall more comfortable feel.

BOA’s pinnacle configuration is offered on the legendary Ion boots. In addition to speed, fit, and durability you’d expect, this system’s top attribute is better fit in the sweet spot (mid-foot) area of the shell. This is achieved through the Focus BOA® configuration that improves positioning around the midfoot, which is enhanced by the H4 dial that allows for micro adjustability precision fit engineered to perform in the toughest of conditions.

Oversized and mitt-friendly so kids can get their boots on, off, and adjusted without help from parents or the instructor.

Sequence BOA® Fit System features two unique lace paths for a fit that snugs evenly from top to bottom with the twist of a single dial

BOA® Fit System featuring Coiler™ technology is controlled by a single dial and uses an inner coiler that automatically recoils the lace back into the inner spool providing clean lace management, a snug fit, and faster lacing with the twist of a dial.

Strong and low-profile, Speed Zone™ Lacing features lightning fast lacing control while allowing you to customize the fit of the upper and lower zone in seconds. More power means more rebound, wrap and response with less lacing effort. New England Rope laces add a virtually indestructible character worthy of our Lifetime Warranty.

No fancy wires, reels, or handles, just a couple of laces for that tried and true feel and customized fit.

The triple-dial BOA® PerformFit™ Wrap delivers a micro-adjustable, zonal precision fit that locks in the heel to deliver superior power transfer, stability, and control. BOA® is engineered and guaranteed to perform in the toughest conditions

The Asym Life Liner uses lightweight, heat-moldable foam for maximum durability and comfort. It features an asymmetric wrap cuff with a hook-and-loop closure that complements our triple-dial BOA® Wrap system to create a secure fit and unmatched control. A DRYRIDE Heat Cycle™ lining manages sweat and reflects body heat inward for a high level of moisture management and warmth.

Imprint 1+ Liner is warm and cozy while providing elevated comfort thanks to a heat-moldable liner with integrated lacing for enhanced foot wrap and heel hold.

Imprint 2 heat-moldable liner features 3M™ Thinsulate™ insulation for additional low-bulk warmth along with hook-and-loop closure for a snug fit.

Imprint 3 heat-moldable liner provides moisture management and added wicking control and features a hook-and-loop closure system for a snug fit and lightweight power panels for elevated response and support.

Imprint 3 heat-moldable liner provides moisture management and added wicking control and features a hook-and-loop closure system for a snug fit and lightweight power panels for elevated response and support.

Life Liner uses heat-moldable and lightweight Ultralon Performance Foam® for maximum durability and performance while also providing a cush, relaxed fit. This liner also features a DRYRIDE Heat Cycle™ lining that captures, radiates, and reflects body heat inward for the highest level of moisture management and wicking control.

Life Liner uses heat-moldable and lightweight Ultralon Performance Foam® for maximum durability and performance while also providing a cush, relaxed fit. This liner also features a DRYRIDE Heat Cycle™ lining that captures, radiates, and reflects body heat inward for the highest level of moisture management and wicking control.

Youth Imprint heat-moldable liner with integrated lacing, lace lock, stretchy Feetbelt strap tightens down the liner

Kids' Imprint Step On® Liner is warm and cozy while providing elevated comfort thanks to a heat-moldable liner with a retention strap for additional ankle support.

The Ankle Hammock features an inner cuff design that holds the heel into the boot heel pocket and features an external BOA® dial to adjust fit and tension, creating a unique system that offers fast, on-the-fly micro-adjustment of the inner cuff while on the mountain.

Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle for increased response.

Integrated Lacing on the liner provides simple tightening and closure that is separate from the shell, giving the rider a customized fit on their foot.

This super low-profile inner cuff carries the laces around the ankle for consistent and secure heel hold with effortless entry and exit.

Tuff Cuff holds your heel and stabilizes your ankle at the same time, wrapping the ankle for the most responsive medial and lateral support with a taller inner cuff for even more support without limiting toe-to-heel flexibility.

Autocant outsole features a platform with dual-density materials for natural motion when absorbing landings and a softer medial side that allows for natural inward give when compressed.

In addition to ReBounce, which wraps the cushioning in heat-reflective foil to keep it cushy and effective in cold weather, the DynoBITE outsole features strategically placed rubber patches for extra traction and durability at the forefoot and heel. Like every Burton Dyno outsole, DynoBITE provides lightweight, durable cushioning that’s formulated specifically for snowboarding. 10-15% recycled rubber content depending on model treads lighter on the planet, too.

In addition to B3 Gel in the heel for greater cushioning, the DynoGRIP outsole features an extra layer of traction at the toe and heel for greater grip. Like every Burton Dyno outsole, DynoGRIP provides lightweight, durable cushioning that’s formulated specifically for snowboarding. 10-15% recycled rubber content depending on model treads lighter on the planet, too.

Superior cushioning, improved board feel, and consistent support in a 20% lighter weight construction. Made entirely of an exclusive cushioning compound specially formulated to withstand repeated impacts and freezing temps for long lasting shock absorption.

PodBED Dual Density outsole features B3 gel under the heel for dampening and advanced cushioning and Burton eco-rubber for traction and durability in key wearing and strike areas.

Step On® Outsole features toe cleats in the forefoot that securely fasten into the binding; EST® optimized midsole lowers your center of gravity and improves board feel without sacrificing comfort

Vibram® Traction Lug outsole features Vibram EcoStep rubber for full rubber coverage under your foot. With an EST construction and added tread and surface changes to the sides of key lugs, this outsole offers the best traction in the Burton line

Vibram® MT outsole uses Vibram EcoStep rubber for high durability and traction. It features a traditional ramp angle, an arch shank for added stability, and B3 gel for additional cushioning.

Vibram® XWing outsole combines Vibram EcoStep+ rubber, injection-molded EVA foam, and TPU exo-frames for lightweight traction and pinnacle performance.

The X Pro Flex outsole features the high-performance grip of a Vibram® EcoStep+ rubber outsole with 50% recycled rubber content. Designed to complement the performance of the Waverange X Pro boot, it balances traction and durability while reducing weight by removing material where it’s not needed.